. . . the mural/graphics at the Three Rivers Historical Museum? You’ll have to attend the exhibit opening of Native Voices to see!
2. . . . the murals at the giant Catholic church in Visalia? After 13 months of much wrangling, negotiating, emails, phone calls, designs, rewriting of proposals, and rebidding, I withdrew my proposals. They’ll have to find someone else for this. (I’d show you my designs, but I don’t want anyone to kipe them.)
3. . . . the mural for a county library, mentioned back in August of 2022? Nothing. It was promised to me, then silence. A call to artists went out, I submitted my designs (because it expanded from one wall to two walls), then silence. The deadline for a decision passed (May 31), and the silence continues.
4. . . .my overgrown unmowed lawn? After the 5th summer of not mowing, hand trimming, transplanting, and fertilizing, it is looking quite nice. Now that it is mowed, I can see the gaps, and next year I will continue to transplant clumps as I find them at the back of the house where there used to be lawn.
5. . . . my gardening efforts once I started using an expensive humus, Deer Out, and milorganite fertilizer? Things look moderately better, although not magnificent. (Let’s remain in Realville, people!) This is the herb garden, fenced against deer, many plants with underground baskets against gophers, very poor soil, direct hot sun in summer, and zero sun in winter.
The painted designs on the wall for a new exhibit called Native Voices at the Three Rivers Historical Museum are finished!
The last day began with little green men, called “The Gathering”. The lighter green was ready for a second coat, and the rest of the shadows had to be drawn in. That should have been very simple, but I struggled a bit on some of the placement. (There was plenty of touch-up base coat paint for erasures.)
This is how the whole wall looked.
Next, I had to figure out how to put the shadows on the far right diamonds, called “Rattlesnake”. Instead of transferring the pattern a bit to the right of the existing diamonds or drawing it in pencil, I used masking tape to “draw” it. This took a lot of thought and measurement. I would think that it was ready to paint, stand back, and see yet another missing strip. Sometimes I was protecting the diamond edge, and sometimes I was shaping the shadows.
Everything took two coats of paint. I wasn’t sure the tape would peel cleanly, but it did fine. While looking here on my computer screen, it appears that some of my spacing is off. Some of those lines got eyeballed, so the entire thing is bound to look hand-painted rather than like applied vinyl. My customer, the Mineral King Preservation Society, looked into vinyl but chose paint instead, a choice which suits me very well.
While the paint was drying, I started touching up the drips and wobbles, along with covering the visible pencil lines and smudges from the graphite transfer paper. The smaller red diamonds called “Quail” had no shadows. Thank goodness, because these were small and detailed. Maybe I should have taped them, but every job is a completely new challenge, and I just bumble through, wishing that sometimes I could have a couple of jobs the same so that the new knowlege wouldn’t be wasted.
Finally, I decided to peel off the tape, risking disaster. (That’s an exaggeration, because as long as there was paint remaining in the necessary colors, anything could be fixed.)
I peeled and only saw a few parts that needed retouching. Acrylic paint (or latex or whatever non-oil paint is) dries so fast, which is a real bonus on a job like this.
Finally, here is a look at the whole wall.
The display will have cabinets in matching colors placed strategically beneath the colorful wall designs.
A few more facts:
The colors were chosen to not clash with the other 2/3 of the room. (The red is magical—sometimes it looks red, sometimes it looks rust, and sometimes it looks pink, and get this: the name is pumpkin spice!)
The other 2/3 of the room is for the Mineral King exhibit, a thorough look at geology, mining, the Disney era, and cabin life in, of course, where else, Mineral King.
The Native Voices exhibit is put together by the MKPS for the Three Rivers Historical Museum. That 1/3 of the room isn’t the responsibility of the MKPS, but the MKPS has paid employees who are real go-getters. They know how to find money, and they wanted the entire room to look cohesive.
This is going to be a great display, and I encourage you to visit the museum!
The exhibit is on the north interior wall of the Mineral King Room in the Three Rivers Historical Museum. (Really, shouldn’t this be called a “history” museum rather than a “historical” museum? This bothers me. The museum isn’t historical; however, I didn’t name it and can read their sign and website and then call them what they call themselves.)
The exhibit is called Native Voices.
The designer chose the colors.
The designs are from Yokuts baskets.
I will freehand the design rather than tape.
It will take a lot of time to paint out the drips, wobbles, and graphite smudges, but less time than taping and then hoping everything stays in place when it dries and the tape is removed.
I only traced the main designs and will have to figure out how to do the “shadows”.
I would dearly love to know how the designer thought I’d get the designs onto the wall.
This last picture shows the design with its “shadows”, along with three of gray people-ish shapes to give an idea of how the finished wall will look. On the left is The Gathering, in the middle is Quail (but the lighter versions won’t be included), and on the right is Rattlesnake.
The quail design had to be repeated, this time higher and to the right. I was on a roll, had this thing figured out!
Trail Guy stopped by to see how things were going. His timing was excellent, and he helped me place this design higher on the wall, measuring and leveling.
It was too big for the kraft paper, so I only drew half of the design, thinking I’d just flip it over and finish it. However, I had to “scab” another piece of paper and finish the drawing, then trim it when we flipped it over. I was thankful that he was still outside, reading through the exhibit on the New England Tunnel and Smelter Company (a Mineral King exhibit).
After tracing that pattern, called “rattlesnake”, I went home for lunch. Tony’s Taverna has a food truck outside the museum, and I know the food is terrific, but I am too frugal to spend $20 for lunch when my kitchen is less than 2 miles away.
After lunch, I returned to finish the final design, which I called “little men” but learned is called “The Gathering”. This one had only one little man traced, and the plan was to keep moving the pattern over until all three were in place.
Oops. There was a mistake. I fixed it, repaired it on the wall and on the pattern, and then worked the little man across the wall. I didn’t tape the bottom of the pattern, because I had to keep lifting it up and crawling beneath it to place the graphite paper, three positions for each little man.
When I thought I was finished, I could see some problems with the little men’s feet not lining up. This is something I could fudge into place (what a weird use of the word “fudge”, but I bet you know what I mean).
Finally, here is a weird thought. As I was figuring out how to do this, I realized that I learned these skills from my mom. When?? Where?? When?? I don’t know, but I feel certain that I must have watched her create a pattern and transfer it somewhere, sometime.
I enlarged these designs onto kraft paper, ordered some very large sheets of graphite transfer paper, gathered a few tools, and drove to the Three Rivers Historical Museum. My job bosses had prepped the wall for me, and they also blocked it off in a very serious manner, along with providing a ladder and a couple of tables. (They are TERRIFIC to work for!)
I had previously tested some carbon paper to see if I could transfer through the kraft paper, but had to go searching at Blick Art Materials for some large graphite sheets. There were two to choose from, and instead of accidentally ordering the wrong one, I bought both.
We measured the wall very carefully to mark the center and then figure out where the first design was to go. Then I taped the smallest design up, trying to see through the kraft paper to place it exactly on the mark I made, adjusting it until it was level.
The design was drawn in pencil, so you can’t see it on this photo. I kept the bottom untaped so I could lift it up to place the graphite paper.
MASKING TAPE WOULDN’T STICK TO THE GRAPHITE PAPER!!
The museum came to the rescue with old-fashioned brown masking tape instead of the easy-removing blue type.
This design is called Quail, taken directly from a Yokuts basket design. I used a straight edge and traced over the pencil lines with an obsolete tool from the olden days of phototypesetting that my students and I refer to as a “spatula”. (Too hard to explain.)
Squint hard, and you can see how it landed on the wall.
Nope. Some are designs, created for museum displays, by exhibit designers. The Three Rivers History Museum hired a museum designer, an exhibit designer, whatever the title is, to create a Native American exhibit, and they (or is it the Tulare County Historical Society? Or the Mineral King Preservation Society? I should pay more attention!) to execute these designs.
Every new job I take on has an entirely new set of challenges. How does one take this little PDF and turn it into a wall design? These exhibit designers may not have completely thought through the execution phase of the display. However, maybe they do know how to do such a job and just didn’t tell the museum. Maybe it involves equipment and technology that I don’t own.
No problem. I figured it out.
The designer sent it with a ?”=1′-0″ grid over the top.
I turned it to black and white, isolated each group, and printed it. (These samples don’t show the whole designs—just wanted to give you an idea.)
Next, I got some giant kraft paper (looks like brown butcher paper on a great big roll, and if you have ever received a wrapped gift from me, you know what I’m talking about) and laid it out on my drafting table. This was quite a big jump from my normal 11×14″ pencil drawings.
And then, I started measuring and drawing.
It took an entire day.
What next? I had to figure out how to get the patterns on the wall. I’ll show you next week, after our monthly Learned List.
